Code: UV-Protection-Oil-Clear
OSMO UV-Protection Oil Clear Satin 410 provides a clear natural oil-based protection for vertical wood surfaces in outdoor areas.
- ✔ Highly water and dirt resistant
- ✔ Clear UV Protection Oil 410 is safe for humans, plants and animals when dry
- ✔ Microporous, penetrating finish which does not crack, peel or flake
- ✔ No sanding necessary when topping up coating
Important Notice: When using OSMO UV Protection Oil on Softwood, it is essential also to apply OSMO WR Base Coat Clear 4001 and OSMO End Grain Sealing Wax 5735. See the Important Notice tab below for more info.
| Surface | Vertical wood surfaces in outdoor areas |
|---|---|
| Application | Flat Brush or Microfibre Roller |
| Coverage | 18m²/L with one coat |
| Drying Time | 12 hours |
| Storage | Do not use or store in extremes of temperature and protect from frost. |
| Clean Up | Clean equipment with water immediately after use. Replace lid on can and stir thoroughly before re-use. |
| General | When using more than one can, make sure batch numbers are the same and mix in a large container to guarantee uniformity. |
| Data Sheets | See download tab for a copy of safety and technical data sheets. |
Important Notice: When using OSMO UV Protection Oil on Softwood, it is essential also to apply OSMO WR Base Coat Clear 4001 and OSMO End Grain Sealing Wax 5735. These additional products are required to:
- ✔ Prevent discolouration or blackening of the timber
- ✔ Protect against rot, swelling, and insect damage
- ✔ Reduce water ingress (especially at end grain/cut edges)
- ✔ Enhance longevity and weather resistance of the finish
